Manufacturers Supply Open Width Type Teamer Industrial Use for Textile Fabric Polyester-Cotton Blended Fabric Steamer Machine to Fix Color After Printing

Still deciding? Get samples of $ !
Request Sample

Product Description

📋

Basic Specifications

Model NO.
HR
Voltage
380V
Load Capacity
<500kg
Warranty
1 Year
Condition
New
Machine Item
Polyester-Cotton Blended Fabric Steamer Machine
Working Experience
32 Years
Delivery Date
Fast Delivery in 25 days
Speed
5-60m/Min
Roller Width
2800mm
Dimensions
18310*5400*3810mm
HS Code
84451112
Capacity
100/Week
⚙️

Product Introduction

The machine is applied to post-steaming after printing for bed sheets, 3D fabric cotton, acrylic, polyester fabric, etc.
Item Configuration Description
1Nominal WidthThe width of the roller is 2800mm
2Vehicle Speed5-70m/min, independently regulated
3Fabric Capacity420m (maximum circulation length: 700-2300mm)
4Operating TempLow: 100ºC~105ºC (Steam); High: 110ºC~200ºC (Heat-conductive oil)
5CompositionFeeding system, condensation, main drive, heating cycle, air circulation, water anti-drip, falling system.
6Driving ModeAC frequency conversion, PLC control system.
7Heating UnitSaturated steam through special water boxes for color development.
8DehumidificationBlower fans at port driven by 2.2Kw double speed motor.
9LubricatingAutomatic allocation system, simple bearing oiling.
10Frame4mm stainless steel vertical walls, strengthened by bars.
🖼️

Machine Display

Machine Photo 1
Machine Photo 2
Machine Photo 3
Machine Photo 4
Machine Photo 5
📊

Process Drawing

Process Drawing
🔄

Similar Machines & Production Lines

Similar Machine
Spinning line
Textile equipment
Production Detail 1
Production Detail 2
Production Detail 3

Frequently Asked Questions

What types of fabrics can this steamer machine process?
It is designed for post-steaming after printing on bed sheets, 3D fabric cotton, acrylic, and various polyester-cotton blended fabrics.
What is the maximum operating temperature?
The machine can operate between 100ºC~105ºC using saturated steam, and up to 200ºC using heat-conductive oil for high-temperature requirements.
How is the machine's speed controlled?
The machine uses an AC frequency conversion and PLC control system, allowing for independent speed regulation between 5 and 70m/min.
What materials are used in the construction of the machine frame?
The vertical walls are made of 4mm stainless steel plates, and the top/bottom sections use 2.5mm stainless steel plates, all reinforced with strengthen bars.
Does the machine come with technical support?
Yes, 24-hour technical support is provided via email, call, and video. Additionally, free spare parts and services are offered within the first 12 months.
What documents are provided upon delivery?
The delivery includes a general layout diagram, an anchoring installation diagram, a product manual, and an electrical schematic diagram.

Related Products